Structural fabrication – Industrial demo 14

Welder at a steel fixture table

Welded to EN 1090 EXC3, coated in our own bay

Welded assemblies to EN 1090 EXC3 by coded welders, blasted and coated in our own 60 m bay.

Two 20 t cranes and a 60 m bay handle frames, girders, skids and pressure parts up to 40 t. Every weld is numbered, traced to a qualified welder and a WPS, and recorded on the weld map.

Blasting to SA 2½ and C4 or C5 coating systems are applied on site, so assemblies leave ready to install.

Assembly weightup to 40 t

Cranes2 × 20 t

ProcessesMAG, SAW, TIG

Steel gradesS235 – S690, P-grades

TestingMT, UT, RT

StandardEN 1090-2 EXC3, ISO 3834-2

Coded welders

Every welder is qualified to EN ISO 9606-1 for the joints they weld.

Weld map included

Each weld is numbered, traced to a welder and a WPS, and delivered in the dossier.

Blast and coat on site

SA 2½ blasting and C4 or C5 coating systems applied in-house.

Close-up of a gloved hand welding with blue sparks

Interior of the steel hall with crane girders

Questions about structural fabrication

Yes, under EN 1090-1 up to EXC3, with the declaration of performance in the dossier.

Blasting to SA 2½ and zinc-rich, epoxy and polyurethane systems for C4 and C5 environments.

We work with installation partners and supervise lifting and fit-up for large assemblies.

Next service

Melting & casting

Induction melting from 50 kg to 12 t. Sand and investment castings in carbon, alloy and stainless grades.

Explore Melting & casting All services