Three lives for every part
New, remanufactured or recovered. Same drawing, same tolerance, same inspection report.
Made to your drawing, first time right
Bar, plate or forging in; finished component out. Machined, fabricated and assembled in one plant, with the dimensional report in the box.
±0.01 mmBrought back to original spec
Worn assemblies are stripped, measured against the original drawing and re-machined. Same tolerance, same certificate, typically 40% of the cost of new.
40% of newWhat cannot be saved goes back to the melt
Scrap and swarf are segregated by alloy, baled and returned to the mill. Certified chain of custody, nothing landfilled.
2,840 t / yrWhat leaves the dock
Every family is available in all three lives. Envelopes and tolerances below are what we hold in series, not what we can reach once.
Cast, forged or from solid. Bores and faces finished in one setup.
Turned, ground and balanced. Keyways, splines and threads in-house.
Spur, helical and bevel. Case-hardened and profile-ground.
Laser-cut, formed and welded sheet. Powder-coated or passivated.
Machine bases and structural frames, stress-relieved and machined after welding.
