{"id":96,"date":"2026-09-29T19:36:13","date_gmt":"2026-09-29T19:36:13","guid":{"rendered":"https:\/\/preview.industrial.anpsthemes.com\/demo14\/services\/"},"modified":"2026-09-29T19:36:13","modified_gmt":"2026-09-29T19:36:13","slug":"services","status":"publish","type":"page","link":"https:\/\/preview.industrial.anpsthemes.com\/demo14\/services\/","title":{"rendered":"Services"},"content":{"rendered":"\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

01<\/span>Services<\/p>

Pick a process, or let us route the part<\/h2>

Most parts pass through three or four of these steps. Keeping them together is how we hold dates and paperwork.<\/p><\/div>

\"Foundry01<\/span><\/a>

Melting & casting<\/h3>

Induction melting from 50 kg to 12 t. Sand and investment castings in carbon, alloy and stainless grades.<\/p>Explore service<\/svg><\/a><\/div><\/article><\/div>

\"Smith02<\/span><\/a>

Open-die forging<\/h3>

Shafts, rings and blocks up to 18 t on a 2,500 t press, with the reduction ratio recorded for every piece.<\/p>Explore service<\/svg><\/a><\/div><\/article><\/div>

\"Steel03<\/span><\/a>

Heat treatment<\/h3>

Quench and temper, normalising, stress relief and case hardening in furnaces surveyed to AMS 2750.<\/p>Explore service<\/svg><\/a><\/div><\/article><\/div>

\"Bar04<\/span><\/a>

CNC machining<\/h3>

5-axis milling and turning up to 4 m, with CMM inspection before anything is packed.<\/p>Explore service<\/svg><\/a><\/div><\/article><\/div>

\"Welder05<\/span><\/a>

Structural fabrication<\/h3>

Welded assemblies to EN 1090 EXC3 by coded welders, blasted and painted on site.<\/p>Explore service<\/svg><\/a><\/div><\/article><\/div>

Not sure where to start?<\/p>

Send a drawing and we'll pick the route.<\/h3>

A metallurgist reviews every enquiry and replies with a melt route, a price and a date within two working days.<\/p>Upload a drawing<\/svg><\/a><\/article><\/div><\/div><\/div><\/section><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
<\/div>

02<\/span>How an order runs<\/p>

From drawing to dispatch in five steps<\/h2><\/div>
<\/svg>01<\/em><\/span>

Drawing review<\/h3>

A metallurgist checks grade, tolerances and test requirements against what we can prove.<\/p><\/div>

<\/svg>02<\/em><\/span>

Melt route<\/h3>

We fix the charge, pour temperature and heat treatment before a single kilo is melted.<\/p><\/div>

<\/svg>03<\/em><\/span>

Production<\/h3>

Casting, forging, heat treatment and machining run on one schedule you can see weekly.<\/p><\/div>

<\/svg>04<\/em><\/span>

Testing<\/h3>

Chemistry, tensile, impact, hardness and UT in our own lab, witnessed on request.<\/p><\/div>

<\/svg>05<\/em><\/span>

Dispatch<\/h3>

Packed, marked with the heat number and shipped with the 3.1 certificate in the box.<\/p><\/div><\/div><\/div><\/section><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

03<\/span>Capabilities<\/p>

The ranges we work to<\/span><\/h2><\/div>
Read the FAQ<\/svg><\/a><\/div><\/div>
Process<\/span>Range<\/span>Materials<\/span>Standard<\/span><\/div>
Melting & casting<\/b>50 kg \u2013 12 t per pour<\/span>Carbon, low-alloy, stainless, Ni-hard<\/span>EN 10293<\/span><\/div>
Open-die forging<\/b>Up to 18 t, \u00d8 1,800 mm<\/span>42CrMo4, 34CrNiMo6, carbon steels<\/span>EN 10250<\/span><\/div>
Heat treatment<\/b>Up to 1,150 \u00b0C, 6 m furnace<\/span>All ferrous grades<\/span>AMS 2750<\/span><\/div>
CNC machining<\/b>5-axis, 4 \u00d7 2 m, \u00b10.01 mm<\/span>Steel, cast iron, stainless<\/span>ISO 2768-f<\/span><\/div>
Structural fabrication<\/b>Assemblies up to 40 t<\/span>S235 \u2013 S690, P-grades<\/span>EN 1090 EXC3<\/span><\/div><\/div><\/div><\/section><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

04<\/span>Industries<\/p>

Where our parts end up<\/h2><\/div>
\"Red01<\/span>

Rail<\/h3>

Bogie castings, coupler parts and axle forgings for freight and passenger fleets.<\/p><\/span><\/a><\/div>

\"Wind02<\/span>

Energy<\/h3>

Hubs, flanges and main shafts for wind, hydro and thermal plants.<\/p><\/span><\/a><\/div>

\"Large03<\/span>

Mining<\/h3>

Wear parts, crusher shafts and mill liners in Ni-hard and manganese steel.<\/p><\/span><\/a><\/div>

\"Container04<\/span>

Marine<\/h3>

Rudder stocks, stern tubes and propeller shafts with class society approval.<\/p><\/span><\/a><\/div><\/div><\/div><\/section><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

05<\/span>Start your project<\/p>

Have a drawing ready?<\/h2>

Send it with the grade, quantity and required date. You get a melt route, a price and a date within two working days.<\/p>

Request a quote<\/svg><\/a>Talk to an engineer<\/a><\/div><\/div>
\"Fabricator<\/div><\/div><\/div><\/section><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"","protected":false},"author":0,"featured_media":0,"parent":0,"menu_order":2,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-96","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/preview.industrial.anpsthemes.com\/demo14\/wp-json\/wp\/v2\/pages\/96","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/preview.industrial.anpsthemes.com\/demo14\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/preview.industrial.anpsthemes.com\/demo14\/wp-json\/wp\/v2\/types\/page"}],"replies":[{"embeddable":true,"href":"https:\/\/preview.industrial.anpsthemes.com\/demo14\/wp-json\/wp\/v2\/comments?post=96"}],"version-history":[{"count":0,"href":"https:\/\/preview.industrial.anpsthemes.com\/demo14\/wp-json\/wp\/v2\/pages\/96\/revisions"}],"wp:attachment":[{"href":"https:\/\/preview.industrial.anpsthemes.com\/demo14\/wp-json\/wp\/v2\/media?parent=96"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}